Heat Transfer Vinyl

Printable Heat Transfer Vinyl - 1 Sheet Inkjet Printable HTV Jet-Pro SS Printable Heat Transfer Paper 8.5x11" Sheets Light Fabric Printable HTV

Carolina Crafter Supply


Regular price $1.35
Printable Heat Transfer Vinyl - 1 Sheet Inkjet Printable HTV Jet-Pro SS Printable Heat Transfer Paper 8.5x11" Sheets Light Fabric Printable HTV.
Jet-Pro SS Inkjet Transfer Paper 8.5x11" - 1 Sheet

This product is intended for use on light fabrics and adheres to cotton, cotton-poly blends and leather.

You can use a hand iron for this transfer paper, a heat press is NOT required.

JET-PRO® SS (SofStretch) Heat Transfer Papers are designed for the heat transfer of photos and images using ink jet printers to light colored t-shirts, sweatshirts, mouse pads, coasters, puzzles and leather goods. Choose garments that have a tight weave. This is particularly important when transferring to sweatshirts.

* This product does NOT require an additional transfer sheet for application.

** We also offer inkjet transfer paper for opaque fabrics.

Application Instructions:

HEAT PRESS INSTRUCTIONS

Printing Instructions:

Print the image in reverse/mirrored format.
Trim away the areas of the transfer that have not been printed on if desired.

Pre-Transferring Instructions:

Prepare the substrate by ensuring the surface is clean, dry and wrinkle free.
Transferring Instructions:

Place the transfer on top of the garment with the image side touching the substrate (backing paper is facing you).
Press 30 seconds @ 375°F using medium/heavy pressure.
Peel the paper while still hot in a smooth even motion. (Paper may be peeled at any temperature, depending on what end ‘feel’ results are preferred).
For best “hand”, stretch the garment while hot.
HAND IRONING INSTRUCTIONS


Printing Instructions:

Print the reversed/mirrored image on the coated side of the paper.
Trim away the areas of the transfer that have not been printed on if desired.
Pre-Transferring Instructions:

Preheat iron to highest setting – do NOT use steam (empty all water).
Iron on a SMOOTH HARD surface; do NOT use an ironing board.
Place a pillowcase on the surface and iron the pillowcase removing any wrinkles.
Place substrate on pillowcase and iron it to remove wrinkles.
Transferring Instructions:

Place image on top of garment with image facing down (backing of paper is facing you).
Using 2 hands, using heavy pressure slide the iron up and down (vertically) over the entire image for 90 seconds, then repeat going from left to right (horizontally) for 90 seconds.
irondirection.jpg
Peel the backing paper off the image immediately after completion of ironing.
*for smaller transfers one-half or less, the ironing time is reduced to ironing vertically 45 seconds and horizontally 45 seconds. If the transfer area is smaller than the iron, iron for 30 seconds with heavy pressure.

Washing Instructions:

Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low-heat setting. Do not iron directly on the transferred area. Wait at least 24 hours before washing.

Storage:

Store JET-PRO® SofStretch Heat Transfer Papers in a cool, dry area and do not remove from carton or poly bag until you are ready to use.

Test Application:

Related Products


Sale

Unavailable

Sold Out